«

»

Jul 27

Brain Fart: Wiring 4 and 5-Pin Relays

I have a setup I want to have power coming out of it with ignition, but kill when I put on the low beams. I've found the 5-pin has an output that's always hot, but I figure I can control that by putting a 4 pin's output as the relay's power trigger.

Here's the setup (I've already determined negatives):



TL;DR:

Output needs 12V+ when one input feeds 12V+ signal
Output needs 0V when second input feeds 12V+ signal

That is all

Help!